Breville the Oracle Manuel D'instructions page 17

PRESET AMERICANO
There are 3 preset Americano settings – small,
medium and large. To use one of these settings:
1. Insert the 2 Cup Filter Basket into the
Porta-filter.
2. Fill the portafilter using the auto grind, dose
& tamp function.
3. Insert the portafilter into the group head.
4. Position your cup so the portafilter spouts
and hot water outlet are directed inside
the cup.
5. Rotate the AMERICANO dial to the
desired cup size.
PRESET
CUP SIZE
Small
Medium
Large
The brewed amounts are approximate
only. Actual amounts may vary due to the
coffee bean roast, blend and freshness as well
as the selected grind size. These factors affect
extraction rate and shot volume.
6. To start extraction, press the AMERICANO
dial. Espresso will extract from the
portafilter spouts, followed by hot water
from the hot water outlet.
AMOUNT
BREWED
Approx. 6oz
Approx. 8oz
Approx. 12oz
NOTE
To override the setting during operation,
press the AMERICANO dial. Pressing the
AMERICANO dial during the espresso
extraction will stop the flow of espresso
and start the flow of hot water. Pressing the
AMERICANO dial during the hot water
delivery will stop the flow of hot water.
TIP
If the preset Americano settings do not suit
your cup size or strength preferences, there
are 6 custom Americano settings for you to
program. Once programmed, your custom
setting will appear after the 3 preset settings.
Refer to 'Americano Adjust - Programming
Custom Settings', page 21.
MANUAL AMERICANO
This allows you total control over the
Americano process: pre-infusion duration,
espresso volume & hot water volume. During
manual Americano mode, the LCD will show a
moving cup icon.
Press and hold AMERICANO dial to activate
pre-infusion. Release AMERICANO dial to
commence espresso pour.
Press the AMERICANO dial to stop espresso
pour and commence hot water pour.
Press the AMERICANO dial again to stop the
pour of hot water.
TIP
You can conduct a manual Americano
extraction each time, or program this as a
custom setting. Once programmed, your
custom setting will appear after the 3 preset
settings. Refer to 'Americano Adjust -
Programming Custom Settings', page 21.
17