Maintenance - Hach FL900 Série Flow Logger Manuel D'utilisation De Base

Masquer les pouces Voir aussi pour FL900 Série Flow Logger:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Figure 13 Hang the logger from a cable
Install on a wall bracket
The logger can be attached to a wall, pole or ladder. Refer to the documents that are supplied with
the hardware for installation instructions.

Maintenance

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Biological hazard. Obey safety handling protocols and wear all of the personal protective equipment
required when handling an instrument that may have come in contact with biological hazardous
materials. Wash and decontaminate the instrument with a disinfectant soap solution and rinse with hot
water before maintenance or shipping.
Electromagnetic radiation hazard. Make sure that the antenna is kept at a minimum distance of 20 cm
(7.9 in.) from all personnel in normal use. The antenna cannot be co-located or operated in conjunction
with any other antenna or transmitters.
Clean the instrument
Clean the exterior of the instrument with a moist cloth and a mild soap solution and then wipe the
instrument dry as necessary.
W A R N I N G
W A R N I N G
C A U T I O N
English 23

Publicité

Chapitres

Table des Matières
loading

Table des Matières