Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Guidelines for Using Extension Cords
• If you are using an extension cord outdoors, be sure it is marked with the suffix "W-A" ("W" in Canada) to
indicate that it is acceptable for outdoor use.
• Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged
extension cord or have it repaired by a qualified person before using it.
• Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Extension Cord Length
Amperes
25 Feet
(At Full Load)
0–2.0
18
2.1–3.4
18
3.5–5.0
18
5.1–7.0
18
7.1–12.0
18
12.1–16.0
14
16.1–20.0
12
SPECIFIC SAFETY RULES FOR RECIPROCATING SAWS
WARNING:
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious
personal injury!
Hold the tool by insulated gripping surfaces
•
may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and
shock the operator.
Always wear safety glasses or goggles.
•
safety glasses.
Always hold the tool firmly.
•
Check your work area for proper clearances before cutting.
•
into your workbench, the floor, etc.
Do not cut oversized workpieces.
•
DO NOT cut nails or screws
•
Inspect your material before cutting.
Before switching on the tool, be sure the blade is not contacting the
•
workpiece.
Keep hands away from moving parts
•
hands below work surface while saw is operating.
Always allow the blade to completely stop
•
touch the blade, it is hot and may cause a serious burn.
WARNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
50 Feet
75 Feet
18
18
18
16
14
12
10
DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
DO NOT leave the tool running unless hand held.
unless you are using a blade specifically designed for this purpose.
Read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
100 Feet
18
18
18
16
16
14
14
12
12
10
10
10
8
8
when performing an operation where the tool
Normal prescription eye or sunglasses are not
and on the top surface of the workpiece. Do not place
before removing from the workpiece. Do not
150 Feet
200 Feet
16
16
14
14
12
12
12
10
8
8
8
6
6
6
This will avoid cutting
5
Publicité
Table des Matières
