Routine Maintenance - BFT Aura 20U Instructions D'installation

14 - ROUTINE MAINTENANCE

The Aura 20Parking system has been designed and built to work for many years provided the
few required maintenance operations are carried out carefully and promptly.
Cleaning the inside
For the station to work correctly, keep parts such as the scanner glass, deneb board
and fan filter as clean as possible. Clean with oil-free compressed air; all these parts
are of vital importance for the correct operation of the station; follow the instruc-
tions carefully and clean weekly.
Cleaning the exterior
Clean the station only with water and a small amount of mild detergent. Do not clean
the mechanical parts of the station with high pressure equipment.
ATTENTION! Clean the station only after disconnecting the electrical supply
Clean the outside glass
Pulire il vetrino esterno
of the scanner (if any)
dello scanner se previsto
Dismantle and clean the
Pulire il filtro del ventilatore
fan filter with oil-free
con aria compressa oil-free
compressed air
smoltandolo
Clean the Deneb
Pulire la schea Deneb con
board with
aria compressa oil-free
oil-free compressed air
37 - Aura20 U