Programmazione Menu 1 - BFT Aura 20U Instructions D'installation

12 - PROGRAMMAZIONE MENU 1

How to use the joystick:
UP: move the button upwards
DOWN: move the button downwards
PUSH: press the button
Parameter
DEVICE STATUS
ALARM
WORK
GRACE TIME
OPERATOR CARDS
CLEAR COUNTER
DATE
TIME
TEMPER.
32 - Aura20 U
Description
The normal operation screen displays
the DEVICE STATUS message "OK",
while, if there are any alarms, a letter
will be displayed that indicates the
type of alarm.
The active operating mode. Change
with UP and DOWN, confirm with
PUSH
The exit time, in minutes (for Aura
20 U exit after paying) Modify with
UP and DOWN, confirm with PUSH.
SEE 12.1
This submenu displays and allows
setting 400 operator cards. SEE 12.2
Function used to clear the antipassback on all registered cards. Press PUSH to clear the
antipassback
The current date in dd/mm/yy format
It is the date displayed and printed on the ticket. SEE 12.3
The current time in hh:mm:ss format
It is the time displayed and printed on the ticket. SEE 12.4
Current temperature in °C. ONLY READING
RIGHT: move the button to the right
LEFT: move the button to the left
Settable values
A: Out of paper
B: Nearly out of paper
D: Head up (KPM)
E: Printer door open (KPM)
G: Com. error 232 (KPM)
H: Printer supply voltage (KPM)
I: Paper jam
M: Cutter error (KPM)
O: Slot photocell busy (KPM)
P: Printer not connected
NORMA
OPEN
CLOSED
ON LOOP
SUBSCR.O.
TICKET O.
0...255
1-4: NORMAL
5-8: OPEN
9-12: CLOSED
13-16: LOOP
17-400: PASS
Default
OK
NORMAL
0
-