Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
6.5.
TOUCH SCREEN PANEL - WINDOW FOR ENABLING OR DISABLING THE
TIME SCHEDULE FOR THE SELECTED UNITS
From the Internal unit management window, or from the group man-
agement window (explained in section 6.2) press the "Timer" key to
access the Monitor to enable or disable the time schedules.
The accessory allows managing up to 4 different time schedules si-
multaneously enables, thus allowing having up to 4 daily time intervals
3
4
5
Alarm Key function or description of the information:
1
Press this key to exit the window and to return to the time schedules enabling or disabling window
2
Press this icon to save the settings created for the current time schedule
3
Press this icon to enable or disable the start schedule for the time schedule
4
Press this icon to enable or disable the stop schedule for the time schedule
5
Press this icon to enable or disable the daily repeat for the time schedule
6
This icon indicates the operating setpoints that will be applied during the time schedule
7
Press this icon to decrease the operating setpoints to be used during the time schedule
8
Press this icon to increase the operating setpoints to be used during the time schedule
9
Press this icon to select the operating mode to be used during the time schedule
10
Press this icon to select the ventilation speed to be used during the time schedule
11
Press this part to set the start schedule for the unit to which the time schedule will be applied
12
Press this part to set the stop schedule for the unit to which the time schedule will be applied
13
Press this part to set the days on which the time schedule will be applied
36
1
11
12
13
WARNING:
The status of the functions is represented by
the colour of the relative icon:
• Bright colour: Function ENABLED;
• Faded colour: Function DISABLED;
7
2
9
10
6
8
Publicité
Table des Matières
