Insertion In Existing Fireplace - Ravelli R 1000 Pro Manuel D'utilisation Et D'entretien

Insertion in existing fireplace

To install the appliance in an existing fireplace compartment, proceed as follows:
step action
1 Fix the complete slide unit inside the existing fireplace.
2 Remove the two telescopic guides and insert the fireplace, fixing it with the wing nuts.
3 Check the correct functionality of the coupling and the release.
You can hear when coupling occurs, as it makes a "clicking" sound.
1
2
⚠
Also in this type of installation, the lower ventilation grille (G) must be provided, as well as the upper one (F)
Use and maintenance manual R 1000 Pro
Rev.1 29/07/2021
Pag.31
x6
MAX 4mm
x4
EN