Dibo Control; Millenium - Dibo 2D MPU-M Mode D'emploi

4.6. DiBO control

4.6.1. Millenium 3

The DiBO- control indicates among other things the following:
- Malfunctions
- State of the machine
- Working hours
After switching on the main switch the following appears on the screen:
This screen shows that the unit is ok and shows also the pressure, temperature and the tank level of the
machine ( see technical data). This is the working screen and shows the processing data.
For consulting the active pumps during the use of the machine one presses on button A.
This screen shows all pumps that are active on that moment.
For consulting the working hours during the use of the machine one presses on button B.
This screen shows the working hours of the pumps.
For consulting the flow and working pressure during the use of the machine one presses at the
same time on the A and B button. This screen shows the flow and working pressure.
DiBO b.v. 53