Kohler SDMO DIESEL 6500 A XL C5 Manuel D'utilisation Et D'entretien page 26

8.6 EU Declaration of Conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS/CS 40047, 29801 BREST CEDEX 9 – France, hereby declare
under our sole responsibility that the following generating sets:
Equipment description:
Generating set KOHLER-SDMO
1. Comply with the safety requirements set out in the Low Voltage Directive - 2014/35/EU of 26 February 2014 in application of the
harmonized standard EN 60204-1: 2006 (AMD 1 2006, COR 2010)
2. Comply with the provisions of the following Directives:
- Machinery - 2006/42/EC of 17th May 2006 in application of the harmonized standard EN 8528:-13 2016
- Electromagnetic compatibility - 2014/30/EU of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
- Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment - 2011/65/EU of
8th June 2011 in application of the harmonized standard EN IEC 63000 : 2018
This equipment is not designed for use outside an enclosure significantly limiting the transmission of sound (the exhaust gases
must be evacuated outside and adequate ventilation must be provided so that any people or animals present are not affected).
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
1085_EN.docx
Make: Trade name:
DIESEL 6000 A XL C5
DIESEL 6500 TA XL C5
Type:
3499231004340
3499231003770
GUIPAVAS, 08/2020
L. ANDRIEUX
President, SDMO Industries
22/254
Serial numbers:
09-2019-00000000-000
>52-2026-99999999-999
2020-08-19