Removing The Battery Pack; Charging The Battery Pack - Toro PowerPlex 14in 40V MAX Mode D'emploi

Removing the Battery Pack

1. Place the chain saw on a flat surface.
2. Press down on the latch and remove the battery
pack from the cavity.
Figure 23
1. Latch

Charging the Battery Pack

Important:
Read all safety precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1. Make sure that the vents on the battery pack are
clear of any dust and debris.
2. Line up the cavity in the battery pack
with the tongue on the charger.
g192109
1. Battery pack cavity
2. Battery pack terminals
3. Battery pack venting areas
3. Make sure that the vents on the battery charger
are clear of any dust and debris.
15
Specifications (page
Figure 24
4. Battery-charge-indicator
button
5. LED indicators (current
charge)
9).
(Figure 24)
g228487