Publicité
Les langues disponibles
Les langues disponibles
2.
Set the chain saw down on a level surface.
3.
Align the tongue of the battery pack with the
battery cavity in the chain saw
Figure 8
4.
Push the battery pack into the battery cavity until
the battery pack locks into place.
5.
Remove the protective cover from the chain.
6.
Ensure that the chain brake is in the O
position
(Figure
9).
Figure 9
1. Chain brake (O
PERATING
position)
7.
With 1 hand on the front handle and the other
on the rear handle, press the trigger lock, then
squeeze the trigger
Figure 10
1. Front handle
2. Chain brake
(Figure
8).
PERATING
2. Chain brake (
STOP
position)
(Figure
10).
3. Trigger lock
4. Trigger
Shutting Off the Chain Saw
To shut off the chain saw, release the trigger.
Whenever you are not using the saw or are
transporting the saw to or from the work area, move
the chain brake to the S
remove the battery.
Cutting with the Chain Saw
WARNING
Operating a chain saw improperly can cause
g228731
serious personal injury or death.
Read and follow all operating instructions
carefully to avoid possible personal injury.
WARNING
Kickback can cause serious or fatal injury to
you.
Always ensure that the chain brake system
is working properly before you operate the
chain saw.
Avoid touching objects to be cut with the tip
of the chain saw.
There are 2 types of kickback:
•
A fast upward motion of the chain saw that results
g192111
when the chain at the nose or top of the bar
contacts an object
•
A fast backward motion of the chain saw that
results when the chain at the nose or top of the bar
is pinched by the object being cut
Figure 11
shows the area of the bar to avoid contacting
an object to prevent kickback.
g192113
1.
Grip the chain saw with 2 hands, with your left
hand on the front handle and your right hand on
the rear handle as shown in
10
position
(Figure
TOP
Figure 11
Figure
12.
9) and
g026070
Publicité
