Publicité
Les langues disponibles
Les langues disponibles
The maintenance schedule includes routines, inspection procedures and simple maintenance processes. Other more
complicated maintenance tasks or requiring special tools should be performed by qualified technicians or by technical
assistance service.
The maintenance schedule shown in this instruction manual is based on normal working conditions. If the appliance is
used under severe conditions such as overload, overheating, abnormal humidity conditions or too much dust, consult the
dealer for recommendations that apply to your specific needs.
Failure to follow the maintenance schedule and precautions may result in injury to the user or death.
Always follow the procedures and precautions in the instruction manual.
Action
Check engine oil level
Change engine oil
Check
Check air filter
Clean air filter
Clean/drain carburetor
Check
Clean and readjust spark plug
Change spark plug
Clean fuel tank and fuel filter
Check suction and high-pressure
valves
Check idle speed
Check/adjust valve clearance
Check fuel line
Check combustion chamber
(1) Perform frequent maintenance works when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical knowledge.
1st or 20
months or 50
hours
Every 2 years (replace if necessary) (2)
Every 3
Every 6 months or
100 hours
hours
(1)
After 500 hours (2)
Every year or
300 hours
(2)
(2)
(2)
Publicité
