Publicité
Les langues disponibles
Les langues disponibles
The control and safety devices installed in the petrol high
pressure washer cannot be removed or inhibited.
Starting the petrol high-pressure washer
Turn on the power tool carefully following the operating
instructions. Using the appliance according to these
instructions reduces the risk of injury.
When the recoil starter returns to its original
position, your hand and arm can be moved quickly
towards the combustion engine. This retraction may cause
fractures, bruises and sprains.
The appliance must not be operated at speeds for which it
has not been dimensioned for. Do not modify parts that
could increase or decrease the speed set by the
manufacturer.
Operating at higher speeds than those specified by the
manufacturer will increase the danger of injury to the user
and damage to the equipment.
Do not cover the appliance while it is running. To reduce the
risk of fire, ventilation slots and exhaust outlet should
always be kept unobstructed.
Use at work
Never use the pressure washer under the following
conditions:
▪ If you notice an obvious alteration in the engine speed;
▪ If there is a clear loss of pressure;
▪ If the engine fails to ignite/start;
▪ Excessive vibrations;
▪ Rain or adverse weather conditions.
Shut off the combustion engine if:
▪ Whenever you want to move away from the appliance or
if it is not being surveilled;
▪ Before refueling the tank. Only refuel when the engine is
cold.
Shut off the combustion engine and remove the cap from
the spark plug:
▪ Before lifting, loading or transporting the appliance;
▪ Before the machine is inspected, cleaned or before
repair work is carried out.
To carry out the maintenance tasks, we present you some
safety rules. However, as it is not possible to encompass all
possible risks during maintenance work, only the user can
decide whether or not to perform the task.
Before
starting
cleaning,
maintenance work:
▪ Place the petrol high-pressure washer on a firm and
steady floor;
▪ Shut off the combustion engine and allow it to cool
down;
▪ Remove the cap from the spark plug.
Keep the spark plug cap away from the spark plug,
as an unintentional spark can cause burns or an
electric shock. The contact of the spark plug with the spark
plug cap may cause an involuntary start of the combustion
engine.
Allow the petrol high-pressure washer to cool down
in particular before carrying out maintenance work
on the combustion engine, exhaust manifold and muffler.
Temperatures of 80° C and above can be reached.
Frequently check the equipment, especially before storage
(for example, before the winter period), regarding wear and
damages.
For safety reasons, replace worn or damaged parts
immediately so the appliance is always in perfect operating
conditions.
Cleaning:
The high-pressure washer must be carefully cleaned after
each use.
Clean the engine by hand (avoid introducing water into the
air filter and exhaust). Avoid wetting the controls and other
equipment / accessories that are difficult to dry. Water
stimulates the appearance of corrosion and rust on metal
parts and causes damage to electrical equipment.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the washer.
adjustment,
repair
and
Publicité
