Threading The Upper Looper - Janome MY LOCK 644D Manuel D'instructions

(A)
1
2
3
44

• Threading the Upper Looper

Place a spool of thread on the spool pin second from
the right.
* The points to thread for upper looper are marked
in red.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the right from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
Thread guide
(B)
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
Thread guide plate
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
Upper looper thread tension dial