Clock Functions - Electrolux EB4GL70CN Notice D'utilisation

When the steam generator is
empty, an acoustic signal sounds.
When the appliance is cool, soak
up all remaining water from the
steam generator with the sponge.
If necessary, clean the steam gen-
erator with some vinegar.
Let the appliance dry fully with the
door open.
6.5 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.6 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
Function
To set a countdown (maximum: 2 hours, 30 mi-
nutes). This function has no effect on the operation
of the appliance. You can also activate it when the
Minute Minder
appliance is deactivated. Touch
function. Touch
OK to start.
To set the length of an operation (maximum: 23
Duration
hours, 59 minutes).
To set the switch-off time for a heating function
End Time
(maximum: 23 hours, 59 minutes).
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
• Cooking with the lamp off - Touch
and hold for 3 seconds to deactivate
the lamp during cooking.
Description
or to set the minutes and
heat to continue the cooking pro-
cedure until the time ends (3 – 20
minutes).
Setting the clock functions:
1. Set a heating function.
ENGLISH 11
to activate the