Electrolux EB4GL70CN Notice D'utilisation page 38

10 www.electrolux.com
Submenus for: Basic Settings
Sym-
bol
6.3 Activating a heating function
1. Activate the appliance.
2. Press OK to confirm.
3. Set the temperature. Press OK to
confirm.
6.4 Steam cooking
The water drawer cover is in the
control panel.
1. Press the cover to open the water
drawer.
2. Fill the water drawer with 700 ml of
water.
The water supply is sufficient for ap-
proximately 30 minutes.
CAUTION!
Do not put water directly into the
steam generator!
Submenu
Set Time of Day
Time Indication
Set + Go
Extra time
Display Contrast
Display Brightness
Set Language
Buzzer Volume
Key Tones
Alarm/Error Tones
Cleaning Assistant
Service
Factory Settings
Description
Sets the current time on the clock.
When ON, the displays shows the current
time when you deactivate the appliance.
When ON, you can activate this function
when you activate the Full Steam function.
Activates and deactivates the function.
Adjusts the display contrast by degrees.
Adjusts the display brightness by degrees.
Sets the language for the display.
Adjusts the volume of press-tones and signals
by degrees.
Activates and deactivates the tone of the
touch fields. It is not possible to deactivate
the tone of the ON / OFF touch field.
Activates and deactivates the alarm tones.
Guides you through the cleaning procedure.
Shows the software version and configura-
tion.
Resets all settings to factory settings.
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
3. Activate the appliance.
4.
Set the steam heating function and
temperature.
5. If necessary, set the function Duration
or End Time
The first steam shows after approxi-
mately 2 minutes. An acoustic signal
sounds when the appliance is at ap-
proximately the set temperature.
The signal sounds again at the end of
the cooking time.
6.
Deactivate the appliance.
.