SilverCrest SDBS 2400 A1 Mode D'emploi page 15

NOTE
► Do not tip or swivel the steam station when the water tank
do, water may be discharged from the filler opening.
5) Insert the plug into a mains power socket.
Ironing without steam
NOTE
Always set the temperature control
the appliance on. The symbols on the temperature control
the following settings:
min -
1) Press the On/Off button
integrated in the On/Off button
lamp
2) Rotate the temperature control
3) The heat-up indicator lamp
up indicator lamp
you can start ironing.
4) Put the iron down on the base station placement area
the temperature control
5) Press the On/Off button
integrated in the On/Off button
go out.
6) Pull out the plug from the mains socket.
│ GB │ IE │ NI
■ 12
All manuals and user guides at all-guides.com
Symbol Material
Synthetics
Wool
( - max)
Cotton/linen
to turn the appliance on. The indicator lamp
flashes.
lights up during heating. As soon as the heat-
goes out, the set temperature has been reached and
to "min".
to turn the appliance off. The indicator lamp
to the lowest level (min) before switching
Temperature
(approx.)
70 - 120 °C
Silk 70 - 120 °C
100 - 160 °C
140 - 210 °C
lights up and the "max" steam indicator
to set the required ironing temperature.
after ironing. Set
and the "max" steam indicator lamp
SDBS 2400 A1
is full. If you
correspond to