ResMed Air10 Guide De L'utilisateur page 4

AirSense 10 / AirCurve 10 /
Lumis
Refer to illustration C:
1. SD card cover
2. Air filter cover
3. Adapter cover
4. Adapter port.
Software compatibility
Ensure the PC intended for use has the appropriate ResMed patient management
software installed.
AirView
ResScan v4.0 or greater
For a full list of compatible software refer to the Data Management Device
Compatibility List on www.resmed.com.
Setting up
See illustration E or F:
1. Ensure the device is disconnected from the power outlet.
2. Connect the USB adapter to the device.
3. Connect one end of the USB cable to the USB adapter and the other to the
Tx Link or ResScan (S9 USB adapter only).
2
S9
Refer to illustration D:
1. DC Power inlet
2. Adapter clip socket
3. Adapter port
4. SD card slot
5. Alarm (Bilevel alarmed devices only).
Air10 S9