Renault Radio Connect R&Go Notice D'utilisation page 124

Masquer les pouces Voir aussi pour Radio Connect R&Go:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONNECTING, DISCONNECTING A TELEPHONE
Scan devices
Search for Tel.
Pair device
Pair Tel.
Select Tel.
Disconnect
Radio with central display
Manual connection (changing the
phone connected)
– press 3 or 19 to access the "Phone"
menu;
– rotate 6 or 15 until you reach the
"Select device" menu;
– confirm by pressing 6.
Phone?
Phone of Pierre
JEDIFON
The list of phones already paired is dis-
played.
Select the telephone that you wish to
connect using 6 or 15, then confirm by
pressing 6.
A message will appear to confirm that
the telephone is connected.
Note: if a telephone is already con-
nected, when changing phones on the
list of phones already paired the ex-
isting connection is replaced automat-
ically with that of the new phone re-
quested.
(2/5)
Connection failure
If connection fails, check that:
– your telephone is switched on;
– your phone battery is not flat;
– your telephone has already been
paired to the hands-free telephone
system;
– Bluetooth® is now enabled on your
phone and on the audio system;
– the phone is configured to accept the
audio system's connection request.
Note: using your hands-free phone
system for prolonged periods will dis-
charge your phone's battery more
quickly.
GB.39

Publicité

Chapitres

Table des Matières
loading

Table des Matières