Renault Radio Connect R&Go Notice D'utilisation page 117

PAIRING, UNPAIRING A TELEPHONE
Bluetooth
Radio with central display
Bluetooth® connection
To activate the audio system's
Bluetooth® function:
– press 3 or 19 to access the "Phone"
menu;
– select "Bluetooth" using 6 or 15, then
press 6 or 18 to confirm;
– select "YES" using 6 or 15, then
press 6 or 18 to confirm.
GB.32
Pairing a phone
To use your hands-free system, pair
your Bluetooth® mobile phone with
the vehicle. Check that the Bluetooth®
of your phone is activated and set its
status to "visible".
YES
Pairing will enable the hands-free
phone system to recognise and store a
NO
phone.
You can pair up to 6 phones, but only
one can be connected at a time.
Pairing can be performed either via the
audio system or via your phone.
Your audio system and phone must
both be switched on.
Note: if you pair a new telephone when
another telephone is already connected
to the audio system, this latter will be
disconnected and replaced by the new
paired telephone.
For safety reasons, carry
out these operations when
the vehicle is stationary.
(1/6)
Select Tel.
Scan devices
Pair device
Pairing a Bluetooth® phone with the
audio system from the audio system
This method allows you to make a
Bluetooth® search from the audio
system.
To pair a phone using this method, per-
form the following steps:
– a c t i v a t e y o u r t e l e p h o n e 's
Bluetooth®;
– press 3 or 19 to access the "Phone"
menu;
– select "Scan devices" using 6 or 15,
then press 6 or 18 to confirm.