Renault Radio Connect R&Go Notice D'utilisation page 100

Masquer les pouces Voir aussi pour Radio Connect R&Go:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION (2/2)
Radio with display on the
instrument panel
On and off
Briefly press 28 to switch on your audio
system.
The audio system can be used with
the vehicle ignition off. It will operate
for several minutes. Briefly press 28 to
make it operate a few additional min-
utes.
Switch off the audio system by pressing
and holding 28. The illustration shows
the radio system display when stopped
or in "Car" mode with the sound off.
CHOOSING THE SOURCE
Scroll through the various audio
sources by pressing 24 or 25 repeat-
edly. When scrolling, the audio sources
appear in the following order: FM → DR
→ AM → USB → Bluetooth®.
You can also select the audio source
from the audio menu. Press 32, select
the audio menu using 26, 33 or 34 and
confirm using 35, then select the audio
source.
When you connect a USB media source
while the audio system is switched
on then the source will automatically
switch to the new media and start to
play its content.
When you connect a Bluetooth® media
source while the audio system is on, if
the audio source playing was already
Bluetooth® then the media content will
switch and start to play automatically
on the audio system.
316 km
7316.0 km
VOLUME
Adjust the volume by pressing 27 or 29.
Briefly press 27 to increase the volume
by one notch.
The display shows ‟Speed", followed by
the current setting.
Mute
Briefly press 28 to mute the sound.
Briefly press 27, 28 or 29 again to
resume playing the current audio
source.
GB.15

Publicité

Chapitres

Table des Matières
loading

Table des Matières