Hoover DUAL POWER MAX PET Guide D'utilisation page 13

Maintenance
How to Remove and Clean Brush roll
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
HOW TO INSTALL:
1
Slip brush roll through belt.
Make sure belt is centered on
pulley when replacing.
2
With belt in place, pull and
slide brush roll into unit,
making sure that the brush
roll end caps are in correct
orientation.
3
Replace belt cover and
secure by replacing all 6
screws.
Brush Roll Model #: 440014278 – To buy, visit Hoover.com
NOTE: Rotate brush rolls manually to make sure belt is not twisted or pinched.
STORAGE
Before storing: Empty Clean Water Tank and let air dry. Replace on cleaner.
Empty Dirty Water Tank, rinse tank and lid thoroughly with clean water and
let air dry.
Allow brushes and underside of carpet cleaner to air dry thouroughly before
storing carpet cleaner on a carpeted or wood surface.
CORD STORAGE
Wrap the power cord around the cord hooks for convenient storage. Attach
the plug end to the cord.
LUBRICATION
The motor and brush rolls are equipped with bearings which contain sufficient
lubrication for their lifetime.
The addition of lubricant could cause damage. Do not add lubricant to motor
bearings or brush rolls.
13