Hoover DUAL POWER MAX PET Guide D'utilisation page 11

Maintenance
How to Remove and Clean Nozzle
Risk of personal injury – Brush roll may suddenly restart – unplug before cleaning or servicing.
1
To prevent possible
leaking, remove and
empty Clean Water Tank
& Dirty Water Tank.
2
With handle in upright
position, tilt carpet
cleaner back slightly.
Pull up on nozzle latch to
remove nozzle from foot
of carpet cleaner.
3
Rotate nozzle up and
forward to remove.
WARNING
4
Remove debris from easily
accessible brushes.
5
Rinse debris from nozzle.
6
Position nozzle onto foot,
making sure to align the
tabs at the front bottom
of the nozzle with the
notches under the front of
the foot.
7
Snap nozzle to foot.
NOTE: The nozzle must be in the proper position for the
unit to have proper suction.
11