Hoover DUAL POWER MAX PET Guide D'utilisation page 12

Maintenance
Cleaning Brush roll & Belt Maintenance
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
HOW TO REMOVE:
1
Turn cleaner off and unplug
from electrical outlet.
2
Remove suction nozzle
from foot.
3
Flip cleaner on its side to
expose the underside.
To remove belt covers, use
Philips screwdriver to remove
6 screws. Arrows show
location of screws.
4
Remove underside belt cover
and the brush roll end cap.
12
NOTE: Rotate brush rolls manually to make sure belt is not twisted or pinched.
5
Pull both brush rolls out
toward user to remove
from cleaner. Belt will still
be attached to cleaner.
6
Rinse brush rolls and allow
to dry.
Belt Model #: 440005536 – To buy, visit Hoover.com
7
To remove belt, unscrew
foot side cover from
underside (3 screws).
8
Flip cleaner upright and
remove upper belt cover
from foot.
9
Slide belt off shaft and
remove. If replacing belt,
install the new belt.