Controls And Instruments; Model Identification - GOLDONI SPECIAL LUX Serie Emploi Et Entretien

specs. They should be kept in perfect working condition. If you note any
malfunctioning, fix or repair them in good time. If necessary contact your
nearest Goldoni Assistance Centre. Failure to observe these instructions
releases manufacturer from all liability.
Pay special attention to the stickers on the machine.
Fig.8: refer to this Operating and Maintenance Manual.

2. CONTROLS AND INSTRUMENTS

See fig.1.
1 Engine Stop lever (Motorstop)
2 Throttle lever
3 Differential lock lever
4 Bottom PTO lever
5 Speed range selector lever - Slow (L) - Fast (V) - Reverse (RM)
6 Clutch lever
7 Gear select lever (1-3 2-4)
8 Left brake lever
9 Right brake lever
10 Handlebar horizontal release lever
11 Handlebar vertical release lever

3. MODEL IDENTIFICATION

Machine identification data are model, series and chassis number. They are on
a specific plate attached to the tool box or the battery holder.
40