Assembly Inumbra On Pantagruel; Assembly Inumbrina On Pantagruel - Extremis PANTAGRUEL Mode D'emploi

ASSEMBLY INUMBRA ON PANTAGRUEL

WHAT YOU NEED
1 person
no. 5 hex key
+/- 15 min.
1. Remove the Lazy Susan.
2. Put the inumbra insert in the hole
in the middle of the tabletop.
Make sure that its conical part is
facing upwards.

ASSEMBLY INUMBRINA ON PANTAGRUEL

WHAT YOU NEED
1 person
no. 5 hex key
+/- 20 min.
1. Remove the Lazy Susan.
2. Put the inumbrina38 insert in the
hole in the middle of the tabletop.
Make sure that the cylindrical
part is facing downwards and the
square plate is facing upwards.
3. Fasten the insert to the table,
putting the bolts through the
bottom of the table. Put the Lazy
Susan back into its original
position.
4. Put the parasol on the stainless
steel tube as explained in points
6-7-8 of assembly option 1
(manual Inumbra page 21).
3. Fasten the insert to the table,
putting the bolts through the
bottom of the table. Put the Lazy
Susan back into its original
position.
4. Put the inumbrina parasol in the
Pantagruel table and block it by
turning the adjusting screw
clockwise. The adjusting screw is
sufficiently tightened when the
inumbrina parasol can no longer
revolve on its axis.
english 7