Assembly Marina Bistro - Extremis MARINA BISTRO Instructions De Montage, D'emploi Et D'entretien

ASSEMBLY MARINA BISTRO

WHAT YOU NEED
min. 1 person
no. 10 - 17 spanner
no. 3 - 4 hex key
+/- 30 min.
2. Put the 5 tabletop profiles on the floor, with the slots facing
upwards, and make sure that the crosses are facing the same
way.
4. Now fasten the table leg assembly with the tabletop connection
to the profiles, each time at the intended place, using 5
M6 x 20 hexagon socket bolts. Make sure the feets are facing
outwards. Remove the spacers.
4 assembly marina table + maintenance
1. Screw the adjustable feet into the legs and put them aside.
3. Insert the tabletop end piece with the lips into the slots from
left to right. Fasten them using 5 M5 x 12 countersunk bolts.
Repeat this operation on the other side, this time from right
to left.
5. Turn over the table. Level the table by screwing the adjustable
feet in or out and fasten the feet by turning the nu until it sits
against the leg.