Ec Declaration Of Conformity - Nilfisk T75 Manuel D'instructions

T75
It is forbidden to work on the electric equipment
before disconnecting the machine or its parts from the
electrical line.
Have the electrical maintenance operations performed
by qualified personnel. Perform the checks on the
electric equipment as specified in the manual.
Risks to the presence of residual high temperature
after stopping the vacuum unit.
During maintenance and cleaning operations, the operator
may come into contact while the machine is stopped, with
parts of the vacuum unit with surfaces at high temperatures.
Specific warnin si ns placed in strate ic points indicate t e
hazard due to the presence of hot surfaces and the obligation
for the user to wear personal protective equipment, in particular
protective gloves.
T e potentially ot parts
ollows

EC Declaration of conformity

Every machine comes with a EC Declaration of conformity. See
ac-simile in fi . 5.
The Declaration of conformity is an important document
and should be kept in a safe place to be presented to the
Authorities on request.
I
GB
E
E
C360
FORBIDDEN
MANDATORY
i temperatures are identified as
IT IS MANDATORY
TO WEAR GLOVES
CAUTION
DANGEROUS
TEMPERATURES
[ NOTE ]
4