Publicité
Assembly Instructions
GB
Before assembling or using this fitness product, please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in
a safe place for maintenance purposes or for ordering spare parts.
For Your Safety
!
RISK!
While assembly of the product keep off children's reach
(Choking hazard - contains small parts).
!
RISK!
Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for da-
mage or injury caused by improper use of the equipment.
!
RISK!
Instruct persons using the equipment (in particular child-
ren) on possible sources of danger during exercising. Only for
appliances with weights or dumbbells. This especially applies
to the area of movement of weights and dumbbells.
!
RISK!
Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the sa-
fety of the user.
!
WARNING!
The training device should be used only for its in-
tended purpose, i.e. for physical exercise by adult people.
!
WARNING!
Before beginning your program of training, stu-
dy the instructions for training carefully.
!
WARNING!
Any interference with parts of the product that
are not described within the manual may cause damage, or
endanger the person using this machine. Extensive repairs
must only be carried out by KETTLER service staff or qualified
personnel trained by KETTLER.
■
The training device has been designed in accordance with the
latest standards of safety. Any features which may have been
a possible cause of injury have been avoided or made as safe
as possible.
■
The training device corresponds with DIN EN 957 -1/-2, class
HB. It is therefore unsuitable for therapeutic use.
■
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts.
Instructions for Assembly
!
RISK!
Ensure that your working area is free of possible sour-
ces of danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
!
WARNING!
Please note that there is always a danger of in-
jury when working with tools or doing manual work. Therefo-
re please be careful when assembling this machine.
■
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cau-
se for complaint, please contact your KETTLER dealer.
■
Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
4
■
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment.
Base your program of exercise on the advice given by your
doctor. Incorrect or excessive exercise may damage your
health!
■
Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
■
Always wear suitable shoes when using.
■
Our products are subject to a constant innovative quality as-
surance. We reserve the right to perform technical modificati-
ons.
■
In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (pa-
ths, doorways, corridors).
■
Always observe the general safety rules and precautions for
working with electrical equipment.
■
The product is not suitable for use by persons weighing over
150 kg.
■
Nobody may be in the moving range of a training person du-
ring training
■
This exercise machine may only be used for exercises indica-
ted in the training instructions.
■
The surface on which the unit is placed must be firm and even.
Place rubber or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid powerful os-
cillations of the dumbbells!
■
When mounting the product please take the recommended tor-
que information into account (M = xx Nm).
■
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed.
■
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
■
For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
■
For machines with rope systems: please ensure that all ropes
are fixed correctly. This is especially important for latissimus
bars.
Publicité
