Hitachi RCI-1,0FSN3Ek Manuel D'installation Et De Fonctionnement page 17

Remote controller operation
7.2 PC-ARF REMOTE CONTROL NAME OF PARTS
Display Part
Fan speed indicator
Operation mode
indicator
The indications of "HEAT"
and "AUTO" are indicated
only for the heat pump type
models.
Operation guide
indicator
"Central control" is indica-
ted while the remote con-
trol operation is prohibited.
Run indicator
It lights while the unit is
operated, and it flashes in
an abnormal conditions
RUN/STOP switch
Operation part
7.3 SETTING OF HIGH SPEED TAP
Ceiling height
1.0 to 2.5HP 3.0 to 6.0HP
Below 2.7m Below 3.2m
2.7 to 3.0m 3.2 to 3.6m
3.0 to 3.5m 3.6 to 4.2m
15 PMML0280A rev.1 - 09/2014
Room name
indicator
A/C
MODE SPEED LOUV.
COOL
HIGH
Motion Sensor is activated
LOUV.
Directional key
Setting of remote control switch
Standard
High Speed (1)
High Speed (2)
Swing louver
indicator
Meeting Room
FLTR
TEMP
ADJ
OK
?
Enter key
The air flow volume can be changed according to the ceiling
height by setting the item code to "C5" form the remote control
switch (Refer to the Installation & Maintenance Manual of the re-
mote control switch for details).
Schedule timer indicator
It is indicated when the schedule
timer function is set.
Operation lock indicator
It is indicated when the operation
lock function is set
Filter sign indicator
FLTR
It is indicated at the set pe-
riod for filter cleaning
Setting temperature
indicator
Motion sensor
indicator
It is indicated only for the air
panel with motion sensor.
Menu switch
to display menu.
Help switch
to display help menu
Return switch
to return to the previous
screen.