Connecting The Control Unit To The Caddy - Polaris P93 Guide Du Propriétaire

7. Place two (2) caps on the wheels as shown in
Figure 9.
Figure 9. Attaching Wheel Caps
8. Attach the support blocks to the caddy using
four (4) screws as shown in Figures 10 and 11.
For the Polaris P93, see Figure 10 for
orientation and positioning of the blocks, and
for the Polaris P94, see Figure 11
x4
Figure 10. Attaching the Support Blocks
(Polaris P93)
x4
Figure 11. Attaching the Support Blocks
(Polaris P94)
9. The transport caddy is now ready to use as
shown in Figure 12.
Figure 12. Transport and Storage Caddy Assembled
3.3 Connecting the Control Unit to the
Caddy
1. Position the control unit over the control unit
hook on the caddy.
2. Slide the locking plate clips into the control
hook and line up the screw holes. Refer to
Figure 13.
1
Figure 13. Position the Locking Plate Clips
3. Secure the locking plate using Phillips head
screws. Do not overtighten. Refer to Figure 14.
2
Figure 14. Secure the Locking Plate
Page 7