Genesis GHG350 Manuel D'utilisation page 8

YOUr Heat GUn
3
4
2
1.
ON/OFF Switch
2.
Wire Stand
3.
Heat Shield
UnpaCKinG anD COntentS
iMpOrtant:
faulty or that a part is missing. if you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
item Description
Heat Gun
Operator's Manual
WarninG:
the tool, plug in power cord or turn the switch on until the missing or damaged parts are
replaced.
aSSeMBLY
WarninG:
power source before adjusting, adding accessories, or checking a function on the tool.
INSTALLING CURVED NOZZLE
1.
unplug the heat gun from the power source.
2.
Slide the ring of the curved nozzle over the metal air nozzle (4- FIG 1) of the heat gun.
3.
When finished, allow the nozzle to cool before removing.
Compact Heat Gun
Operator's Manual
4.
Air Nozzle
5.
Curved Nozzle
Due to modern mass production techniques, it is unlikely the tool is
QtY
1
1
if any parts are missing or damaged, do not attempt to assemble
always be sure that the tool is switched off and unplugged from the
1
5
item Description
Curved Nozzle
GHG350
fiG 1
QtY
1
6
5