Genesis GHG350 Manuel D'utilisation page 2

SpeCifiCatiOnS:
• Model .....................................GHG350
• Rated Power ...........................120V~ 60Hz, 350W (2.9A)
• Air Temperature.......................662° F (350° C)
• Air Flow...................................9.9 cu. ft./min (280 l/min)
• Cord Length.............................6 Ft
• Net Weight ..............................0.79 lb
Includes: Curved Nozzle
WarninG:
operator's manual before operating this tool. Save this Manual for future reference.
toll-free Help Line: 1-888-552-8665
Look for this symbol to point out important safety precautions.
it means attention!!! Your safety is involved.
WeAR YOuR
SAFeTY GLASSeS
FOReSIGHT IS BeTTeR
THAN NO SIGHT
GeneraL SafetY rULeS
WarninG:
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
WarninG:
instructions before using this equipment. failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
WORK AREA SAFETY
• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor
plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized plug (one
Compact Heat Gun
Operator's Manual
to reduce the risk of injury, user must read and understand this
WarninG:
being thrown into your eyes, which can result in severe eye damage. Before beginning
tool operation, always wear safety goggles or safety glasses with side shields and a
full face shield when needed. We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always wear eye protection
which is marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding, drilling,
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
The Operation of any power tool can result in foreign objects
GHG350