Important Details For Your Information - Tecsis PEX10 Mode D'emploi

1. Important details for your information

1. Important details for your information
Read these operating instructions before installing and starting the pressure sensor.
Keep the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications.
If questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.tecsis.de
„
The product data sheet is designated as DD 770/DE 770
„
Contact tecsis for additional technical support +49 69 5806-2306
„
If the serial number on the product label and/or the 2D code on the hexagon gets illegible
(e.g. by mechanical damage or repainting), the retraceability of the instrument is not possible
any more.
tecsis pressure sensors are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment.
Use of the product in accordance with the intended use PEX10, PEX11, PEX13, PEX14, PEX15:
Use the intrinsically safe pressure sensor to transform the pressure into an electrical signal in
hazardous areas.
Certificate ATEX:
Pressure sensor for operation in hazardous areas in compliance with the respective certificate
(see attached EC-type examination certificate BVS 08 ATEX E 067 X).
ATEX Approval ratings:
Gases and mist: Mounting to Zone 0; Installation in Zone 0, Zone 1 and Zone 2.
Dust: Mounting to Zone 20; Installation in Zone 20, Zone 21 and Zone 22.
Mining Category M1, M2.
24 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
GB