The Deck Does Not Follow The Truck's Movements; The Deck Is Not Flush With The Dock Platform In Parked Position; The Lip Does Not Move To The Vertical (Parked) Position; The Optional Bdc Does Not Function Correctly - stertil SP Manuel D'utilisation

7.1.6

The deck does not follow the truck's movements.

Cause
There is an obstruction.
The safety valve in the main cylinder is
blocked.
There was a power loss.
Other cause.
7.1.7

The deck is not flush with the dock platform in parked position.

Cause
There is an obstruction.
Cross traffic legs are not positioned
correctly.
Other cause.
7.1.8

The lip does not move to the vertical (parked) position.

Cause
There is an obstruction.
Other cause.
7.1.9

The optional BDC does not function correctly.

Cause
Optional BDC switch is in "1" position.
Other cause.
Operation Manual (Version: B)
Solution
Remove the obstruction.
Briefly press [deck up] one or more
times.
1. Switch the main switch to '1'.
2. Briefly press [deck up] to activate the
control current.
Contact your local service department.
Solution
Remove the obstruction.
Press [deck up] to let the deck rise.
Release to let the deck descend into
parked position.
Contact your local service department.
Solution
Remove the obstruction.
Contact your local service department.
Solution
Switch BDC switch to "0" position.
Contact your local service department.
40 Type SP