The Deck Does Not Rise (Sufficiently) Even Though The Motor Is Running; The Lip Of The Dock Leveller Does Not (Sufficiently) Extend; The Lip Is Extended Before The Deck Rises; The Deck Does Not Descend Or Does Not Descend Sufficiently - stertil SP Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.1.2
The deck does not rise (sufficiently) even though the motor is
running.
Cause
There is a load on the deck.
There is an obstruction.
Other cause.
7.1.3

The lip of the dock leveller does not (sufficiently) extend.

Cause
There is an obstruction.
The optional BDC is (still) switched on.
The lip does not extend completely.
Other cause.
7.1.4

The lip is extended before the deck rises.

Cause
There is a load on the deck.
There is an obstruction.
Other cause.
7.1.5

The deck does not descend or does not descend sufficiently.

Cause
There is an obstruction.
The safety valve in the main cylinder is
blocked.
Other cause.
Operation Manual (Version: B)
Solution
Remove the load from the deck.
Remove the obstruction.
Contact your local service department.
Solution
Remove the obstruction.
Switch off BDC.
Contact your local service department.
Solution
Remove the load from the deck.
Remove the obstruction.
Contact your local service department.
Solution
Remove the obstruction.
Briefly press [deck up] one or more
times.
Contact your local service department.
39
Type SP

Publicité

Table des Matières
loading

Table des Matières