Placing The Baby In The Safety Seat; Using Your Matrix Light In Apushchair - JANE MATRIX LIGHT 2 Manuel D'instructions

_ 3 PLACING THE BABY IN THE SAFETY
SEAT
3a - Unfasten the buckle.
3b - Loosen the harness by pulling the shoulder straps while pressing the
tightening button.
3c - Place the baby in the safety seat, ensuring that they are sitting well
back and that their back is straight. Join the top ends of the buckles.
3d - Insert them in the central lock and press until you hear a click.
Tighten the shoulder straps and pull on the tightening strap.
3e -
_4 USING YOUR MATRIX LIGHT IN A
PUSHCHAIR
MATRIX LIGHT can be anchored on any JANÉ chassis that has the
PRO-FIX system.
4a - To fasten the safety seat onto a chassis, insert the connectors
into the slots on the chassis and press until they click.
4b - To release your MATRIX LIGHT from the chassis, press the cat-
ches on the handle and pull the seat upwards.
EN 23