Masquer les pouces Voir aussi pour SI 40:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
4. Pull out the aroma tank/wastewater tank.
5. Clean the aroma tank/wastewater tank, the cov-
er, the lid, the extension tube and the mask with
warm water and a mild cleaning agent. Clean these
parts thoroughly and allow them to dry completely.
Residual moisture or wetness represents an in-
creased risk of bacterial growth.
6. Once the parts are completely dry, you can reas-
semble the device.
7. Store the device in a cool, dry place.
Cleaning the main unit
• Never submerge the main unit in water.
• Clean the main unit using a soft, slightly damp cloth
and a mild cleaning agent. Then wipe dry with a soft,
lint-free cloth. Do not use any chemical or abrasive
cleaning agents.
Note
Any other cleaning method or type of cleaning product
could damage the device. Failure to comply with this
instruction will void the warranty.
Cleaning the nozzle
Note
Periodically, the nozzle that directs the steam into ex-
tension tube may become blocked. When the device
starts to produce significantly less steam, or no steam
at all, you need to clean the nozzle.
1. Pull the cover up and off.
2. Turn the nozzle in a clockwise direction. Pull the
nozzle up and off.
3. Insert a thin object (for example a needle) into the
nozzle in order to clean the air duct.
4. To reattach the nozzle, align the grips of the noz-
zle with the recesses on the nozzle head. Turn the
nozzle anticlockwise, until you feel the grips of the
nozzle click into place.
Disinfection
The mask can be disinfected using boiling water.
• Remove the mask from extension tube.
• Place the mask into boiling water for 5 minutes.
• Then dry the mask carefully using a soft cloth.
• Re-attach the mask to the extension tube once it has
completely dried.
Storage
• Do not store in damp conditions (such as in a bath-
room) and do not transport with any damp items.
• When storing and transporting, protect from pro-
longed direct sunlight.
• Store the device in a dry place, ideally in the original
packaging.

7. Disposal

For environmental reasons, do not dispose of the de-
vice in the household waste.
Please dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any questions, please contact the
local authorities responsible for waste disposal.
15

Publicité

Table des Matières
loading

Table des Matières