afriso DTA 20 E Notice Technique page 50

5.6 Mounting the mounting kit for battery tanks "Pneum." (optional)
Depending on the manufacturer, battery tanks have one or more plastic
flanges (A). The plastic flanges are provided for filling, venting or withdrawal.
The mounting kit is installed in one of the plastic flanges (A).
1. Check whether the plastic flange of the battery tank has a hole Ø 10 mm
to Ø 10.5 mm which is closed by means of a blind plug.
2. Remove the blind plug.
3. Push the weight (C) and the hose (C) through the hole.
Mounting
A
A
B
C
A. Plastic flange
A. Connection piece with
conical thread
B. Hose
C. Weight Ø 9 mm
DTA 20 E
EN
17