afriso DTA 20 E Notice Technique page 47

5.3.1 Inserting/connecting the battery
The 9 V monobloc battery is not factory-installed in the control unit. The
monobloc battery is contained in the bag of accessories.
Mounting
1. Open the cover of the battery
compartment using a slotted
screwdriver.
2. Connect the 9 V monobloc bat-
tery.
3. Push the 9 V monobloc battery
into the battery compartment (ver-
ify correct mounting position).
4. Close the cover of the battery
compartment.
DTA 20 E
EN
14