Assemblage De L'armoire Principale À La Base De L'armoire; Installation Des Composants De Cuisson - Pit Boss PBV3G1 Assemblage Et Fonctionnement

. ASSEMBLING COOKING GRID
Parts Required:
8. ASSEMBLAGE DE L'ARMOIRE PRINCIPALE À LA BASE DE
L'ARMOIRE
Installation:
Pièces nécessaires :
6 x Vis (#C)
Installation :
• ssemblage de l'armoire principale à la base de l'armoire Placez la base
de l'armoire à côté de l'armoire principale, les deux orientés dans la
même direction. Soulevez prudemment l'armoire principale et placez-
la sur la base. Fixez l'armoire principale à la base à l'aide de six vis.
10. PLACING WATER PAN AND WATER

9. INSTALLATION DES COMPOSANTS DE CUISSON

Parts Required:
Pièces nécessaires :
1 X Water pan Support (#16)
8 x Supports de la grille de cuisson (#2)
1 x Water Pan (#15)
4 x Grilles de cuisson (#1)
Installation:
1 x Réservoir d'eau (#16)
. ASSEMBLING COOKING GRID
1 x Support du réservoir d'eau (#17)
•Place Water Pan Support (#16) and
SUPPORT TO THE UPPER SMOKER
Water Pan (#15) onto the bottom area of
Installation : CABINET ASSEMBLY
Cabinet and place
(#4) into the Cooking Grid Support as
• Insérez le support du réservoir d'eau en bas de l'armoire intérieure
Parts Required:
Fig.10.1 & Fig.10.2 shown.
principale, puis placez le réservoir dans le support. Illustration 9A.
REMARQUE: Assurez-vous qu'il y ait toujours de l'eau dans le
1 . ATTACHING DOOR ASSEMBLY INTO
réservoir pendant la cuisson. Il va récupérer la graisse et les gouttes
Installation:
de vos aliments et permettre un nettoyage plus facile. Si vous fumez
des aliments pendant une période prolongée, mettez le réservoir
d'eau plus haut pour que l'eau dure plus longtemps. Parts Required:
• Ensuite, insérez six supports de grille de cuisson dans les trous situés le
long des parois intérieures de l'armoire intérieure principale. Une fois
Installation:
les supports dans les trous, inclinez-les vers le bas pour qu'ils soient
fixés dans la bonne position. Répétez le même processus, en faisant
correspondre les hauteurs pour la paroi du côté droit. Illustration 9B.
• Enfin, placez les grilles de cuisson sur les supports à l'intérieur de
l'armoire principale. Illustration 9C.
ATTENTION: Ne modifiez la hauteur entre chaque grille de cuisson que
10. PLACING WATER PAN AND WATER
lorsque le fumoir est complètement refroidi pour éviter les blessures.
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
(#4) into the Cooking Grid Support as
38
Fig.10.1 & Fig.10.2 shown.
Smoker Cabinet Assembly (#2) using 4 x
SUPPORT TO THE UPPER SMOKER
.
CABINET ASSEMBLY
CABINET ASSEMBLY TO THE
LOWER SMOKER CABINET
ASSEMBLY
10. PLACING WATER PAN AND WATER
Parts Required:
.
1 x Upper Smoker Cabinet Assembly (#2)
CABINET ASSEMBLY TO THE
1 x Lower Smoker Cabinet Assembly (#14)
LOWER SMOKER CABINET 6 x #10-24*1/2"(#C)
ASSEMBLY
Installation:
Parts Required:
• Mount Upper Smoker Cabinet Assembly
1 x Upper Smoker Cabinet Assembly (#2)
(#2)to the Lower Smoker Cabinet Assembly
1 x Lower Smoker Cabinet Assembly (#14)
(#14) using 6 x #10-24*1/2"(#C) as Fig.8.1 &
Parts Required:
6 x #10-24*1/2"(#C)
Fig.8.2 shown.
Installation:
1 X Water pan Support (#16)
• Mount Upper Smoker Cabinet Assembly
1 x Water Pan (#15)
(#2)to the Lower Smoker Cabinet Assembly
(#14) using 6 x #10-24*1/2"(#C) as Fig.8.1 &
Fig.8.2 shown. Installation:
•Place Water Pan Support (#16) and
. ASSEMBLING COOKING GRID
Water Pan (#15) onto the bottom area of
Cabinet and place
PAN SUPPORT ONTO THE BOTTOM SUPPORT TO THE UPPER SMOKER
(#4) into the Cooking Grid Support as
AREA OF CABINET AND PLACING
CABINET ASSEMBLY
Fig.10.1 & Fig.10.2 shown.
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
. ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
. ASSEMBLING COOKING GRID
x Cooking Grid (#4)
CABINET ASSEMBLY
SUPPORT TO THE UPPER SMOKER
1 . ATTACHING DOOR ASSEMBLY INTO
Parts Required:
CABINET ASSEMBLY
Parts Required:
Installation:
Parts Required:
Installation:
Installation:
Cooking Grids
Installation:
THE UPPER SMOKER CABINET
ASSEMBLY
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
10. PLACING WATER PAN AND WATER
AREA OF CABINET AND PLACING
PAN SUPPORT ONTO THE BOTTOM
COOKING GRIDS INTO THE
10. PLACING WATER PAN AND WATER
AREA OF CABINET AND PLACING
COOKING GRID SUPPORT
COOKING GRIDS INTO THE
PAN SUPPORT ONTO THE BOTTOM
Parts Required:
COOKING GRID SUPPORT
x Cooking Grid (#4)
AREA OF CABINET AND PLACING
Parts Required:
1 X Water pan Support (#16)
x Cooking Grid (#4)
COOKING GRIDS INTO THE
1 x Water Pan (#15)
1
1 X Water pan Support (#16)
COOKING GRID SUPPORT
1 x Water Pan (#15)
Installation:
Installation:
Parts Required:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
x Cooking Grid (#4)
•Place Water Pan Support (#16) and
Cabinet and place Cooking Grids
Water Pan (#15) onto the bottom area of
1 X Water pan Support (#16)
(#4) into the Cooking Grid Support as
Cabinet and place Cooking Grids
Fig.10.1 & Fig.10.2 shown. 1 x Water Pan (#15)
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
Installation:
1 . ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
•Place Water Pan Support (#16) and
1 . ATTACHING DOOR ASSEMBLY INTO
ASSEMBLY
THE UPPER SMOKER CABINET
Water Pan (#15) onto the bottom area of
ASSEMBLY
Parts Required: Cabinet and place
Parts Required:
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
Installation:
Installation:
1
1 . ATTACHING DOOR ASSEMBLY INTO
1
Cooking Grids
THE UPPER SMOKER CABINET
ASSEMBLY
UPPER SMOKER
UPPER SMOKER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
x Cooking Grid (#4)
Cooking Grids
9A
THE UPPER SMOKER CABINET
ASSEMBLY
9B
1
9C
10
Cooking Grids
8
16
17
2
1
1
1
10
1
2