Assembling The Main Cabinet To The Cabinet Base; Installing The Cooking Components - Pit Boss PBV3G1 Assemblage Et Fonctionnement

Parts Required:

8. ASSEMBLING THE MAIN CABINET TO THE CABINET BASE

Parts Required:
Installation:
6 x Screw (#C)
Installation:
• Prepare the Main Cabinet to be mounted to the Cabinet Base. Position
the Cabinet Base next to the Main Cabinet, with both facing the same
direction. Carefully, lift the Main Cabinet onto the Cabinet Base. Secure
the Main Cabinet to the Cabinet Base using six screws.
10. PLACING WATER PAN AND WATER

9. INSTALLING THE COOKING COMPONENTS

Parts Required:
Parts Required:
8 x Cooking Grid Support Brackets (#2)
1 X Water pan Support (#16)
1 x Water Pan (#15)
4 x Cooking Grids (#1)
Installation:
1 x Water Pan (#16)
. ASSEMBLING COOKING GRID
1 x Water Pan Support (#17)
•Place Water Pan Support (#16) and
SUPPORT TO THE UPPER SMOKER
Water Pan (#15) onto the bottom area of
Installation:
CABINET ASSEMBLY
Cabinet and place
(#4) into the Cooking Grid Support as
• Insert the Water Pan Support into the bottom of the main interior
Parts Required:
Fig.10.1 & Fig.10.2 shown.
cabinet, then sit the Water Pan in the support. Note 9A.
NOTE: Keep water in the Water Pan at all times while cooking. It will
catch grease and drippings from your cooks and allow for easier
1 . ATTACHING DOOR ASSEMBLY INTO
Installation:
clean up. If smoking for an extended period, move Water Pan up
higher to allow water to last longer.
Parts Required:
• Next, insert eight Cooking Grid Support Brackets into the holes along
the inside left wall of the Main Cabinet. Once positioned in the holes,
tilt downward to secure into position. Repeat the same process,
matching the same heights, for the right-side wall. Note 9B.
Installation:
• Lastly, place the Cooking Grids on the Cooking Grid Support Brackets
inside the Main Cabinet. Note 9C.
CAUTION: To change the height between each Cooking Grid, adjust
only when the smoker is completely cooled to avoid injury.
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
10
Smoker Cabinet Assembly (#2) using 4 x
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
.
CABINET ASSEMBLY TO THE
LOWER SMOKER CABINET
10. PLACING WATER PAN AND WATER
ASSEMBLY
Parts Required:
.
1 x Upper Smoker Cabinet Assembly (#2)
CABINET ASSEMBLY TO THE
1 x Lower Smoker Cabinet Assembly (#14)
LOWER SMOKER CABINET 6 x #10-24*1/2"(#C)
ASSEMBLY
Installation:
Parts Required:
• Mount Upper Smoker Cabinet Assembly
1 x Upper Smoker Cabinet Assembly (#2)
Parts Required:
(#2)to the Lower Smoker Cabinet Assembly
1 x Lower Smoker Cabinet Assembly (#14)
(#14) using 6 x #10-24*1/2"(#C) as Fig.8.1 &
6 x #10-24*1/2"(#C)
Fig.8.2 shown.
1 X Water pan Support (#16)
Installation:
1 x Water Pan (#15)
• Mount Upper Smoker Cabinet Assembly
(#2)to the Lower Smoker Cabinet Assembly
Installation:
(#14) using 6 x #10-24*1/2"(#C) as Fig.8.1 &
Fig.8.2 shown.
•Place Water Pan Support (#16) and
. ASSEMBLING COOKING GRID
Water Pan (#15) onto the bottom area of
Cabinet and place
PAN SUPPORT ONTO THE BOTTOM SUPPORT TO THE UPPER SMOKER
(#4) into the Cooking Grid Support as
AREA OF CABINET AND PLACING
CABINET ASSEMBLY
Fig.10.1 & Fig.10.2 shown.
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
. ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
. ASSEMBLING COOKING GRID
x Cooking Grid (#4)
CABINET ASSEMBLY
SUPPORT TO THE UPPER SMOKER
1 . ATTACHING DOOR ASSEMBLY INTO
Parts Required:
CABINET ASSEMBLY
Parts Required:
Installation:
Parts Required:
Installation:
Installation:
Cooking Grids
Installation:
THE UPPER SMOKER CABINET
ASSEMBLY
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
10. PLACING WATER PAN AND WATER
AREA OF CABINET AND PLACING
PAN SUPPORT ONTO THE BOTTOM
COOKING GRIDS INTO THE
10. PLACING WATER PAN AND WATER
AREA OF CABINET AND PLACING
COOKING GRID SUPPORT
COOKING GRIDS INTO THE
PAN SUPPORT ONTO THE BOTTOM
Parts Required:
COOKING GRID SUPPORT
x Cooking Grid (#4)
AREA OF CABINET AND PLACING
Parts Required:
1 X Water pan Support (#16)
x Cooking Grid (#4)
COOKING GRIDS INTO THE
1 x Water Pan (#15)
1
1 X Water pan Support (#16)
COOKING GRID SUPPORT
1 x Water Pan (#15)
Installation:
Installation:
Parts Required:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
x Cooking Grid (#4)
•Place Water Pan Support (#16) and
Cabinet and place Cooking Grids
Water Pan (#15) onto the bottom area of
1 X Water pan Support (#16)
(#4) into the Cooking Grid Support as
Cabinet and place Cooking Grids
1 x Water Pan (#15)
Fig.10.1 & Fig.10.2 shown.
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
Installation:
1 . ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
•Place Water Pan Support (#16) and
1 . ATTACHING DOOR ASSEMBLY INTO
ASSEMBLY
THE UPPER SMOKER CABINET
Water Pan (#15) onto the bottom area of
ASSEMBLY
Parts Required: Cabinet and place
Parts Required:
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
Installation:
Installation:
1
1 . ATTACHING DOOR ASSEMBLY INTO
1
Cooking Grids
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
UPPER SMOKER
PAN SUPPORT ONTO THE BOTTOM
UPPER SMOKER
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
x Cooking Grid (#4)
Cooking Grids
9A
THE UPPER SMOKER CABINET
ASSEMBLY
9B
1
9C
10
Cooking Grids
8
16
17
2
1
1
1
10
1
2