Program Playback - JVC RV-NB75B Instructions

To select a track using the remote control
Examples:
To select number 5, press 5.
0
To select number 15, press +10 then 5.
0
To select number 20, press +10 then 10.
0
To select number 125, press +100, +10, +10
0
then 5.
To fast forward/reverse
Press and hold [J] or [I]
during playback.
To select a group (for MP3/WMA)
Press [UP] or [DOWN].
Press [UP] to skip to the next group.
0
Press [DOWN] to skip to the previous group.
0
NOTE
When you have stopped playback of an
0
MP3/WMA file by pressing [o], pressing [F]
will start playback from the beginning of the
stopped file (Resume playback).
To cancel the Resume playback, press [o] when
0
playback is stopped.
Resume playback is canceled in the following
0
situations:
- during program playback
- during random playback
- when the disc compartment door is opened
- when another source is selected

Program playback

You can program up to 32 tracks from a disc or a
USB device in any desired order including the
same tracks.
1
Press [CD F] or [USB/iPod F].
2
Press [o] to stop playback.
3
Press [PLAY MODE].
– –
4
Press the number buttons to select the
track to program.
While making a program, you cannot
0
specify a group number to select a track.
5
Press [SET].
6
Repeat step 4 and 5 to select other tracks
for the program.
7
Press [CD F] or [USB/iPod F].
Program playback starts.
To confirm the programmed tracks
While program playback is stopped, press
[UP] or [DOWN] repeatedly.
The tracks in the program will successively
appears on the display in the programmed order.
To add tracks in the program
Press the number buttons while program playback
is stopped, and then press [SET].
The track is added to the end of the program.
P–01
PRGM
21