Pairing (Registering) Other Bluetooth Devices - JVC RV-NB75B Instructions

To turn on/off the BLUETOOTH function
of the System
While the System is turned on
Each time you press the button, this function is
turned on/off.
"BT OFF" : Turns off the BLUETOOTH
function of the System.
"BT ON" : Turns on the BLUETOOTH
function of the System.
The BT indicator lights up in blue when the System
is set to "BT ON", and the System is connected to
a BLUETOOTH device.
Pairing (registering) other
BLUETOOTH devices
1
When "BLUETOOTH" is selected as the
source, press and hold
[BLUETOOTH F] for more than 2
seconds.
Canceling of connection starts.
DISCNNCT
"BT READY" appears when the connection
has been canceled.
2
Perform the pairing operation on the
target BLUETOOTH device.
On the target device, select "RV-NB75" (this
System) from the available BLUETOOTH
device list.
When the target device requests for
0
password during pairing, enter "0000".
For information on operating the
0
BLUETOOTH device, see the instruction
manual for the BLUETOOTH device.
Pairing is completed and the BLUETOOTH
device is connected automatically. The
BLUETOOTH indicator lights up.
18
NOTE
The connection is canceled automatically in the
following cases.
Connection is canceled on the BLUETOOTH
0
device, or BLUETOOTH function is set to "OFF".
The System or the BLUETOOTH device is
0
turned off (except for BLUETOOTH standby)
CAUTION
The maximum distance for a possible
0
BLUETOOTH connection is 10 m. The distance
may be shorter depending on the usage
environment.
When the iPhone or smartphone is connected to
0
the System via BLUETOOTH, ring alert of phone
calls and mails can also be heard from the
speakers of the System.
This System is not equipped with a microphone
0
feature. To make a call, cancel the connection
with the System or use the microphone on the
iPhone or smartphone.
Some BLUETOOTH devices may not be
0
available to the System.