Operating The Appliance; Switching On; Power Mode; Temperature Mode - CASO DESIGN TC 2100 Manuel D'instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Warning
► Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.

15.4 Operating the Appliance

15.4.1

Switching On

Plug the power plug into a suitable outlet.
The temperature of the cooker plate surface displayed: is the temperature of the surface of
the induction cooker lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H". An acoustic signal sounds. All LEDs
will light up for 1 seconde. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø
140 mm - 240 mm).
Now press the ON/STANDBY switch to turn on the device.
15.4.2

Power Mode

 Press the function key 4. The preset power stage "8" is selected and the device turns
on. With the + / -), you can change the settings at any time in a range from 1 – 12.
Please note
► We recommend to select the function "Power Mode" with levels form 1-12 in case of
steaming food or boiling water for example.
15.4.3

Temperature Mode

 Press the Function Key 3. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
 Internal Thermometer: When the external thermometer is not connected, then you can
change the setting with + / - keys at any time in a range from 60 – 240°C.
(Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and 240°C).
 Internal Thermometer: The temperature is measured by a sensor below the glass
ceramic plate, therefore the displayed temperature can deviate from the temperature
in the pot.
► For precise cooking, we recommend using the enclosed external thermometer.
Please note
41

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2223

Table des Matières