Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
The Spa satisfy all directives and is not dangerous to the end-
user if the installation, use, and maintenance are according to
the instructions supplied by the manufacturer, and on condition
that electrical and mechanical parts are maintained in perfect
For this reason the instructions provided in this manual must be
meticulously followed.
The supporting structure is highly resistant.
The product is built to conform to standard low -voltage
directives 2006/95/EEC.
The protection rate for the bathtub is IPX5.
M
.
AX
ABSORBED POWER
MySpa OF 210
MySpa OF 250/225
Heater
Compliance with the level of safety laid down by European
electromagnetic compatibility directives 2004/108/EEC is
guaranteed by implementing the following European standards
on the product:
EN 55014-1
EN 55014-2
SYMBOLS USED
IN THIS MANUAL
symbols described below are used in this installation manual
and on certain parts of the product itself.
CONVENTIONAL SYMBOLS AND THEIR MEANING.
WARNING
DANGER OF ELECTROCUTION.
Warn user that, if the described operation is not performed
observing safety regulations, there is a risk of electric shock.
WARNING:
GENERAL DANGER.
Warn user that, if the described operation is not performed
observing safety regulations, there is a risk of physical injury.
NOTE.
Inform the personnel involved - information that, if not observed,
may lead to minor injuries to people or damage to the product.
WARNINGS.
Inform the personnel involved -important information.
HYDRAULIC INSTALLER.
A skilled technician capable to install the product under normal
conditions and carry out all adjustments, maintenance and
repair jobs on mechanical parts as necessary. The technician is
not authorised to work on live electrical systems.
ENGLISH
5000 W
5000 W
6000 W
ELECTRICAL INSTALLER.
A Specialist technician capable of installing the product under
normal conditions, is responsible for all electrical work, such as
setting, maintenance and repairs. The technician is capable of
working in energized control cabinets or on electrical sockets.
WARNING
Inform features present only in some versions of the products.
OPTIONAL
Items present only if ordered.
CONSUMPTION MATERIAL
Items not provided by the manufacturer.
SAFETY REGULATIONS
its weight (see installation preparations) and that all necessary
inlets and outlets have been provided.
by specialised service personnel only.
installed by more than one person.
other than those for which they were installed.
labels.
etc.) inside the bathroom where the appliance is to be installed
must be in compliance with current regulations.
inside or next to the spa during use.
WARNING.
Do not use acetic silicone.
that the silicone is not acetic.
centre and use original spare parts only.
WARNING.
The manufacturer declines all responsibility:
herein are not complied with.
existing standards of the installed country.
personnel.
24
Publicité
