Ottobock 10S17 Instructions D'utilisation page 8

Battery
Opening electrode
connection
Motor connection
provided in the factory
4 Installation into the prosthesis
Lubricate all cable plugs with Silicone Grease 633F11. After connecting all
cables, use Assembly Tool 711M16 to engage the Electric Wrist Rotator into
the lamination collar. Secure using Lock Ring 11S4.
5 Disposal
These products may not be disposed of with household waste
in some jurisdictions. Disposal that is not in accordance with
the regulations of your country may have a detrimental impact
on health and the environment. Please observe the information
provided by the responsible authorities in your country regarding
return and collection processes.
6 Technical data
Operating voltage
Rotation angle
No-load speed
Corresponds to
angular rotation of
Service life of the component 5 years
8 | Ottobock
757B15
[V] 6
[°] >360
r.p.m. 13.5
[°/sec.] 81
Rotation Control Switch
for motor Connection Cable
13E50 or 13E97
Closing electrode
connection
Rotation Control Switch
for motor Connection Cable
13E50 or 13E97
757B20 757B21 757B35=*
7.2 7.2
>360 >360
17 17
102 102
7,2
>360
17
102