Table des Matières
Publicité
1
2
b
a
3
DRIVE CHAIN
Checking steps:
• Remove the rubber cap 1.
• Check the oil level through the check window 2
located on the drive chain housing.
• If the oil is below the minimum level mark a,
remove the dipstick 3 and add sufficient oil to
the maximum level mark b.
Recommended oil:
Gear oil "GL-3"
75W or 80W
CAUTION:
Make sure that no foreign material enters the
drive chain housing.
• Reinstall the dipstick 3.
NOTE:
Align the notch c of the dipstick handle with the
projection d of the drive chain housing.
• Install the rubber cap.
8
INSP
ADJ
Publicité
Table des Matières
