Know Your Advanced Wireless Remote Control - Warn Zeon Platinum Guide D'utilisation

Wireless Control
Activation Switch
Auxiliary Power Port 1
Wireless Control Activation Switch: The wireless control activation switch activates or deactivates the
wireless control unit. This switch must be 'ON' (activated) in order
for the Advanced Wireless Remote Control to operate the winch.
The wireless control unit uses a very small but constant current from
the vehicle battery. It is recommended to turn the switch "OFF"
(deactivate) the unit to prevent draining the vehicle battery when not
operating the vehicle for an extended period of time.
Auxiliary Power Ports (1 and 2): The auxiliary power ports allow you to connect and control two
separate auxiliary systems from the winch.
The optional Auxiliary Kit details can be found at your WARN®
Authorized Dealer or www.warn.com.
Remote Controlled Clutch Wire Harness: The remote controlled clutch wire harness plugs into the winch
control pack.
KNOW YOUR WINCH
Auxiliary Power Port 2
Remote Controlled
Clutch Wire Harness
WARN INDUSTRIES
9
KNOW YOUR ADVANCED WIRELESS REMOTE
Before you begin, you should familiarize yourself with your WARN® Advanced Wireless Remote Control
and each of its functions.
LCD
Left
Button
Winch
Power-out
Button
Advanced Wireless
Remote Control:
LCD:
Select Button:
Left Button:
Right Button:
Winch Power-out Button:
Winch Power-in Button:
Reset Button:
USB Charging Port:
USB Cable (not shown):
Car Charger Adapter
(not shown):
92821A3 92821A3
Right
Button
Select
Button
Winch
Power-in
Button
The Advanced Wireless Remote Control allows the operator to control the winch
and two auxiliaries.
Display of function menus, important vehicle feedback and winch functions.
Press to confirm/activate selections.
Press to navigate left through each menu display.
Press to navigate right through each menu display.
Press to control the power-out operation of the winch.
Press to control the power-in operation of the winch.
The reset button is used to restart your remote in rare cases when it functions
incorrectly. Resetting the remote will preserve your settings.
Used to charge the internal battery.
Used to connect Advanced Wireless Remote Control to
chargers or your computer to charge.
Car charger allows plugging into car's DC socket to keep
your Advanced Wireless Remote Control powered when
you are on the go.
WARN INDUSTRIES
10
USB Charging Port
Reset
Button
Helpful Hint:
Connect your remote
to a charging device now.
This will allow your remote
to charge while you are
installing your winch. Refer
to page 13 for charging
steps.