Troubleshooting - Fisher & Paykel ActiveSmart RF135B Guide D'utilisation

Troubleshooting

US
42
CA
If there is a problem with your appliance, please check the following points before contacting
your local Fisher & Paykel Authorized Service Agent or the Customer Care Center.
All models
Problem
Appliance does
not operate.
Light not
working.
Light and display
not working.
Motor operates
for long periods.
Storage
compartments
too warm.
Food freezing in
the refrigerator.
Unfamiliar noises. Cabinet not stable or level.
Possible causes
No electricity at power outlet.
Light not functioning.
Refrigerator not working.
Product in SABBATH MODE.
Hot weather.
Frequent door openings.
Large amount of food
recently added.
Temperature control set too low. See Temperature control section
Doors not sealing properly.
Temperature setting not correct. See Temperature control section
Frequent door openings.
Large amount of food
recently added.
Temperature setting not correct. See Temperature control section
Food placed directly in front of
air outlets.
Freezer is defrosting.
What to do
Check that the plug is correctly connected
and power switched on.
Check another appliance at the same outlet.
Check house fuse.
The LED light cannot be serviced by the
user. Contact your Fisher & Paykel Dealer
or Fisher & Paykel Authorized Service
Agent.
Check refrigerator is turned on at wall.
Press and hold ,
for 4 seconds.
Minimize door openings to allow
temperature to stabilize.
(pages 20 – 21).
Check that cabinet is level and gasket
seals are clean.
(pages 20 – 21).
Minimize door openings to allow
temperature to stabilize.
(pages 20 – 21).
Move chill sensitive foods away from the
center back of the shelves.
See Installation section (pages 6 – 9) or
refer to Sounds (page 41).
and together